Triplett 9305 Manual de usuario Pagina 1

9305

9 3. Touch the Temperature Probe head to the part whose temperature you wish to measure. Keep the probe touching the part under test until the readi

10 NOTE: The detector is designed with high sensitivity. Static electricity or other sources of energy may randomly cause the red indicator to

11 RANGE BUTTON When the meter is first turned on, it automatically goes into AutoRanging. This automatically selects the best range for the measure

12 Triplett Three Year Limited Triplett warrants instruments and test equipment manufactured by it to be free from defective material or workmanshi

13 PURCHASE, AND THE PROVISIONS OF THE WARRANTY ARE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES EXPRESSED OR IMPLIED. The purchaser agrees to assume

14 Notes

15

1 Safety International Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further in

2 CAUTIONS Improper use of this meter can cause damage, shock, injury or death. Read and understand this user manual before operating the meter. Alwa

3 Meter Description 1. Current clamp 2. Non-contact AC voltage indicator light 3. Clamp trigger 4. Data Hold button/Backlite 5. Rotary Function

4 Specifications Function Range & Resolution Accuracy (% of reading) AC Current (50/60Hz) 40.00AAC ± (2.5 % + 8 digits) 400.0 AAC ± (2.8 % + 8 d

5 Clamp size Opening 1.2" (30mm) approx Diode Test Test current of 0.3mA typical; Open circuit voltage 1

6 Operation NOTICES: Read and understand all warning and precaution statements listed in the safety section of this operation manual prior to using t

7 Resistance Measurements 1. Insert the black test lead into the negative COM terminal and the red test lead into the positive terminal. 2. Set th

8 Capacitance Measurements WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors before taking any